How are cure times determined?
Cure times vary depending on a wide variety of factors. Please review the documents below and read our blog for more helpful information.
Solvent Cement Cure Charts
Solvent Cement Instructions
< Cements
Oatey® Medium Clear CPVC Cement
Key Features & Benefits
- Recommended for residential and commercial hot and cold water systems up to 200°F / 93°C
- For use on all schedules and classes of CPVC pipe and fittings up to 6 in. diameter with interference fit
- Recommended application temperature 40°F to 110°F / 4°C to 43°C
- All Masters solvent cement and primer products are certified to UL Greenguard Gold
- Lo VOC Solvent Cement that meets California South Coast Air Quality Management Districts (SCAQMD) 1168/316A or BAAQMD Method 40 requirements
- Meets ASTM Standard F493
- Complies with NSF/ANSI 61 health effects requirements
- Please refer to the Masters Limited Warranty for warranty details
Specifications
| Color: | Clear |
|---|---|
| Brand: | Oatey |
| Material: | CPVC |
| Maximum Application Temperature °F: | 110ºF |
| Maximum Application Temperature °C: | 43ºC |
| California VOC Compliant: | No |
| Product Type: | CPVC Cement |
| Maximum Use Temperature °F: | 200ºF |
| Set Type: | Standard (40 - 110° F) |
|---|---|
| Set Speed: | Medium Set |
More Specifications
Technical Resources (6)
More Downloads
Available in 3 variations
Frequently Asked Questions
What PVC cements allow for the longest set-up time, for multiple joint assemblies?
The regular body cement has the longest working time once the joint has been assembled on pipe sizes up to 4” diameter. However, the regular body cement has the quickest set up time before the joint is assembled because of the quick evaporation process. Any pipe sizes over 4” should be discussed with the technical department.
What cements allow for the shortest set-up time, for multiple joint assemblies?
The heavy duty cement has the shortest working time once the joint has been assembled on pipe sizes up to 4” diameter. However, the heavy duty cement has the slowest set up time before the joint is assembled because of the slow evaporation process. Any pipe sizes over 4” should be discussed with the technical department.