How are cure times determined?
Cure times vary depending on a wide variety of factors. Please review the documents below and read our blog for more helpful information.
Solvent Cement Cure Charts
Solvent Cement Instructions
< Cements
Oatey® Standard Yellow ABS Cement
Key Features & Benefits
- Recommended for non-pressure applications
- For use on all schedules and classes of ABS pipe and fittings up to 6 in. diameter with interference fit
- Recommended application temperature of 40°F to 110°F / 4°C to 43°C
- Recommended for use on potable water or DWV
- Low VOC, high performance solvent cement meets California South Coast Air Quality Management District (SCAQMD) 1168/316A or BAAQMD Method 40 requirements
- Meets ASTM Standard D2235
- Complies with NSF/ANSI 61 health effects requirements
- Please refer to the Oatey Limited Warranty for warranty details
Specifications
| Weight: | 0.32 lb. |
|---|---|
| Size: | 4 oz. |
| Color: | Yellow |
| Brand: | Oatey |
| Material: | ABS |
| California VOC Compliant: | No |
| Maximum Application Temperature °F: | 110ºF |
|---|---|
| Set Type: | Standard (40 - 110° F) |
| Maximum Application Temperature °C: | 43ºC |
| Set Speed: | Fast Set |
| Product Type: | ABS Cement |
| Maximum Use Temperature °F: | 180ºF |
More Specifications
Technical Resources (7)
More Downloads
Available in 5 variations
Frequently Asked Questions
What PVC cements allow for the longest set-up time, for multiple joint assemblies?
The regular body cement has the longest working time once the joint has been assembled on pipe sizes up to 4” diameter. However, the regular body cement has the quickest set up time before the joint is assembled because of the quick evaporation process. Any pipe sizes over 4” should be discussed with the technical department.
What cements allow for the shortest set-up time, for multiple joint assemblies?
The heavy duty cement has the shortest working time once the joint has been assembled on pipe sizes up to 4” diameter. However, the heavy duty cement has the slowest set up time before the joint is assembled because of the slow evaporation process. Any pipe sizes over 4” should be discussed with the technical department.